0
14 Cu Ft Stainless Steel SS Hopper With Lid
14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid14 Cu Ft Stainless Steel SS Hopper With Lid

14 Cu Ft Stainless Steel SS Hopper With Lid

Current Price: $569.99
  • This hopper is made of nonmagnetic stainless steel. The base is made of steel. The hopper part is 36x36" inside at the top. The straight sided section at the top is 14-1/4" deep, the overall depth is 26-3/4" inside. The hole at the bottom is 7x7". The slide gate at the bottom does not close the bottom off completely and will need some modifications if a gate is to be used. The lid hinge has a couple loose spot welds at the one end that should be redone, or you could drill a hole and put a small ss bolt in it. The lid also has some other dings and dents from use, but could be made to work fine with a little bit of TLC. The gas shocks do not hold the lid unless it is opened completely.
Details
  • Brand: N/A
  • Size: Length: 42 in. Width: 42 in. Height: 42 in.
  • Condition: Used
  • SKU: 210648
  • Consigner: J
  • Warehouse Storage Location: back
  • Shipping Weight (lbs, oz): 171,
  • Lister: jw
  • Country of Manufacture: United States
  • Items in Lot: 1
  • This hopper is made of nonmagnetic stainless steel. The base is made of steel. The hopper part is 36x36" inside at the top. The straight sided section at the top is 14-1/4" deep, the overall depth is 26-3/4" inside. The hole at the bottom is 7x7". The slide gate at the bottom does not close the bottom off completely and will need some modifications if a gate is to be used. The lid hinge has a couple loose spot welds at the one end that should be redone, or you could drill a hole and put a small ss bolt in it. The lid also has some other dings and dents from use, but could be made to work fine with a little bit of TLC. The gas shocks do not hold the lid unless it is opened completely.