The core of this roller is 2-1/8" solid steel rod.
The rubber coating is 3/16" thick at the edge and is a little thicker in the middle because the face of the roller is crowned. This rubber is quite hard and is in good condition.
The axle is 22mm for the first 25MM then steps down to 15MM for the remaining 13.5MM.
The 22MM section of the axle on one end is chewed up a little from being turned with a channel lock.
The core of this roller is 2-1/8" solid steel rod.
The rubber coating is 3/16" thick at the edge and is a little thicker in the middle because the face of the roller is crowned. This rubber is quite hard and is in good condition.
The axle is 22mm for the first 25MM then steps down to 15MM for the remaining 13.5MM.
The 22MM section of the axle on one end is chewed up a little from being turned with a channel lock.