Current Price: $313.49
- Capacity (tons): 1/2
- Capacity (lb): 1000
- Lift Travel (feet): 3'10"
- Lift Speed (feet per minute): 16
- Volts: 230
- Phase: 3
- Motor Horse Power: 1/2
- Lifting Medium: Link Chain
- Minimum Distance Between Hooks (inches): 18"
- Pendant/Control Length From Bottom of Hoist (ft): 7
- Length of Hoist power supply cord (ft): 3'10"
- Hoist comes with xxx beam trolley that fits beams with xxx inch to xxx inch wide flange
- Hoist Comes With Chain Container
- This is a used hoist in good condition, it has been load tested and works like it should
- This is a used hoist that has been load tested and works like it should.
- It is currently wired for 230 Volt 3 Phase. It could be converted to 460v 3ph by an electrician.
- The cover is broken where the control pendant wire goes into the hoist. This is not a structural part of the hoist, and will not effect performance. It is possible that another hole could be drilled in another spot on this cover to mount the pendant wire. It looks like this was broken by dropping the hoist on the fitting.
- We are selling this for a low price because the cover is broken and it has a short chain, only 46" of lift.
Details
- Brand: ACCO Wright-Way
- Size: Length: 22 in. Width: 12 in. Height: 16 in.
- Condition: Used
- SKU: 210633
- Consigner: J
- Warehouse Storage Location: AB-09-06
- Shipping Weight (lbs, oz): 95,
- Lister: jw
- Country of Manufacture: United States
- Items in Lot: 1
- Capacity (tons): 1/2
- Capacity (lb): 1000
- Lift Travel (feet): 3'10"
- Lift Speed (feet per minute): 16
- Volts: 230
- Phase: 3
- Motor Horse Power: 1/2
- Lifting Medium: Link Chain
- Minimum Distance Between Hooks (inches): 18"
- Pendant/Control Length From Bottom of Hoist (ft): 7
- Length of Hoist power supply cord (ft): 3'10"
- Hoist comes with xxx beam trolley that fits beams with xxx inch to xxx inch wide flange
- Hoist Comes With Chain Container
- This is a used hoist in good condition, it has been load tested and works like it should
- This is a used hoist that has been load tested and works like it should.
- It is currently wired for 230 Volt 3 Phase. It could be converted to 460v 3ph by an electrician.
- The cover is broken where the control pendant wire goes into the hoist. This is not a structural part of the hoist, and will not effect performance. It is possible that another hole could be drilled in another spot on this cover to mount the pendant wire. It looks like this was broken by dropping the hoist on the fitting.
- We are selling this for a low price because the cover is broken and it has a short chain, only 46" of lift.
- Brand: ACCO Wright-Way
- Size: Length: 22 in. Width: 12 in. Height: 16 in.
- Condition: Used
- SKU: 210633
- Consigner: J
- Warehouse Storage Location: AB-09-06
- Shipping Weight (lbs, oz): 95,
- Lister: jw
- Country of Manufacture: United States
- Items in Lot: 1
