0
Airco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco Gun
Airco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco GunAirco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco Gun

Airco Pulse Arc II Programable 400 Amp Mig Welder Med 20 Wire Feeder Tweco Gun

Current Price: $1,519.99
  • This is a used welder that has been tested and works and welds good. I would say the wire feeder is a little slow compared to a Miller, but seems to work like it should. We tested this unit with 0.035" wire, the mig gun liner and tip are for 0.035. the feed rolls in the wire feeder are for 1/16" wire but they fed 0.035" just fine.  This unit is ready to go, connect to power, add wire and shielding gas and you can weld.
  • .
  • Welder Specs:
  • Model # Pulse Arc II 400 Programable
  • Stock # 1345 5340
  • Serial # RH 807 029
  •  
  •  
  • Welder Output:
  • 36 Volts 400 Amp at 60% duty cycle in pulsed mode
  • 32 Volts 300 Amp at 60% duty cycle in CC mode
  • 29.5 Volts 300 Amp at 60% duty cycle in CV mode
  • Max Open Circuit Volts  78
 
 
  • Welder power input:
  • 200/230/460Volts
  • 3 Phase
  • Pulsed 62/57/28 Amps
  • CV 38/35/17 Amps
  • CC 41/38/19 Amps
  • 60 HZ
  •  
  •  
  • Wire Feeder Specs
  • Model # Med 20
  • Code 1240
  • Stock # 2351-1375
  • Serial # 707-807-966
  • 42 Volts AC 60 Hz 4Amp
  •  
  • Notes
  • Welder Input Power cord is 14 ft long
  • Wire feeder has two drive rolls.  
  • Mig gun is a 15ft Tweco 400Amp gun that has the outer rubber taped at a few places.
  • Ground cable is 15 ft long
 
Details
  • Brand: Airco
  • Size: Length: 52 in. Width: 50 in. Height: 28 in.
  • Condition: Used
  • SKU: 209597
  • Consigner: J
  • Warehouse Storage Location: pulled
  • Shipping Weight (lbs, oz): 480,
  • Lister: jw
  • Country of Manufacture: United States
  • Items in Lot: 1
  • This is a used welder that has been tested and works and welds good. I would say the wire feeder is a little slow compared to a Miller, but seems to work like it should. We tested this unit with 0.035" wire, the mig gun liner and tip are for 0.035. the feed rolls in the wire feeder are for 1/16" wire but they fed 0.035" just fine.  This unit is ready to go, connect to power, add wire and shielding gas and you can weld.
  • .
  • Welder Specs:
  • Model # Pulse Arc II 400 Programable
  • Stock # 1345 5340
  • Serial # RH 807 029
  •  
  •  
  • Welder Output:
  • 36 Volts 400 Amp at 60% duty cycle in pulsed mode
  • 32 Volts 300 Amp at 60% duty cycle in CC mode
  • 29.5 Volts 300 Amp at 60% duty cycle in CV mode
  • Max Open Circuit Volts  78
 
 
  • Welder power input:
  • 200/230/460Volts
  • 3 Phase
  • Pulsed 62/57/28 Amps
  • CV 38/35/17 Amps
  • CC 41/38/19 Amps
  • 60 HZ
  •  
  •  
  • Wire Feeder Specs
  • Model # Med 20
  • Code 1240
  • Stock # 2351-1375
  • Serial # 707-807-966
  • 42 Volts AC 60 Hz 4Amp
  •  
  • Notes
  • Welder Input Power cord is 14 ft long
  • Wire feeder has two drive rolls.  
  • Mig gun is a 15ft Tweco 400Amp gun that has the outer rubber taped at a few places.
  • Ground cable is 15 ft long