Nachi 2HP 4GPM 1000PSI 12.9Gal Tank Hydraulic Unit PowerPack W/Controls Cylinder

Current Price: $1,804.99

This is a used hydraulic unit that is in good condition.
This is a plug and play set-up with a push-button motor starter, a two way hand pendant, a hydraulic cylinder, and a power cord all connected. If you plug this thing into 480V 3 phase you can operate the cylinder without any further wiring.
This unit could be rewired to 230 volt 3 phase.
It has a 2 HP 1725 RPM 230/460V 3PH Lincoln motor.
Pump is a Nachi VDS-0B-1A3-10 Variable Volume Vane Pump with 15 L/M Displacement @1800 RPM.
The directional control valve is a Nachi SS-G01-C7Y-R-C-115-E20 solenoid valve with 115 volt solenoids.
This pump puts out 1000PSI max.
This unit has a Miller 2-1/2" bore x 17" stroke 1-3/4" rod hydraulic cylinder plumbed to the pump.
It also has a Square D push button motor starter, a GE 30A 600V disconnect, and a power cord with a 20A 480V twist-lock plug.
There is limit switch wired into the controls that was used to turn the valve off once it is tripped.
The tank has a 12.94 gallon Capacity.
The tank is 13x20x11.5"inside.
The overall dimensions of this unit for shipping is are 36lx30wx26"h.
This cylinder has a theoretical force of 4908 pounds. This unit could be hooked to a different hydraulic cylinder of your liking.

Details

This is a used hydraulic unit that is in good condition.
This is a plug and play set-up with a push-button motor starter, a two way hand pendant, a hydraulic cylinder, and a power cord all connected. If you plug this thing into 480V 3 phase you can operate the cylinder without any further wiring.
This unit could be rewired to 230 volt 3 phase.
It has a 2 HP 1725 RPM 230/460V 3PH Lincoln motor.
Pump is a Nachi VDS-0B-1A3-10 Variable Volume Vane Pump with 15 L/M Displacement @1800 RPM.
The directional control valve is a Nachi SS-G01-C7Y-R-C-115-E20 solenoid valve with 115 volt solenoids.
This pump puts out 1000PSI max.
This unit has a Miller 2-1/2" bore x 17" stroke 1-3/4" rod hydraulic cylinder plumbed to the pump.
It also has a Square D push button motor starter, a GE 30A 600V disconnect, and a power cord with a 20A 480V twist-lock plug.
There is limit switch wired into the controls that was used to turn the valve off once it is tripped.
The tank has a 12.94 gallon Capacity.
The tank is 13x20x11.5"inside.
The overall dimensions of this unit for shipping is are 36lx30wx26"h.
This cylinder has a theoretical force of 4908 pounds. This unit could be hooked to a different hydraulic cylinder of your liking.