This is a new sealed 55-gallon drum of VALCOOL VP 800 P SEMI-SYNTHETIC CUTTING FLUID.
VP800P Chlorine-free Rust-preventive Machining Solution from Walter Valenite. ValCool VP800P semi-synthetic micro-emulsion has excellent aluminum machining properties. This low mineral oil is chlorine-free and is formulated with extreme pressure additives and rust-prevention agents so that you can achieve great surface finishes and rust-free workpieces. Besides, the fluid remarkably helps you have faster operations and extended tool life. This stable cutting oil provides you with extreme lubricity and heat absorption, and therefore, you can proceed with an adequately cooled-down cutting zone. This semi-synthetic cutting fluid from Walter Valenite offers low foam properties for smooth machining. It effectively resists bacteria growth and, in turn, prevents rancidity and improves sump life. By using this high-film-strength product, there is less metal-to-metal contact and proper chip formation. This cutting fluid is available in 5-gallon pail, 55-gallon drum, and 220 and 275-gallon tote containers, and it is recommended to be used in 5 to 10 percent concentration to achieve maximum results. This VP800P cost-effective metalworking fluid is free from phenol, sulfur, nitrate, and boron, and it works the best on aluminum machining. However, it can be efficiently used on materials such as ductile iron, cast iron, gray iron, copper, steel, Inconel, titanium, brass, etc. You can use the fluid for all moderate-to-heavy-duty machining operations, including cutting, drilling, sawing, and grinding. The slightly viscous liquid is water-soluble and turns milky blue in color with a mild odor. It promotes tramp oil rejection and increases the productivity of machining operations as a whole. This cutting fluid is easy to dispose of, and it minimizes maintenance costs as well. Also, it does not cause skin irritations upon exposure. Moreover, you don't have to practice any extra precautions when using the product on machine parts in the recommended concentration.
BENEFITS
EP additives and rust preventive agents in the fluid help achieve high lubrication, cutting area cooling, and brilliantly surface-finished, corrosion-free workpieces.
It speeds up machining activities, increases productivity, and extends tool life.
VP800P has great film strength to decrease metal-to-metal contact and improve chip formation.
It also fights against bacteria growth to prevent rancidity and offers cleaner sumps.
If used in the recommended concentration, you need not practice any special precautions to use the product.
APPLICATIONS
The low-mineral oil from Walter Valenite is designed for moderate-to-heavy-duty applications, and it is a perfect choice for aluminum machining tasks.
You can also use ValCool VP800P semi-synthetic cutting fluid on materials such as alloys, steels, gray iron, cast iron, ductile iron, brass, titanium, copper, etc.
This cost-effective machining solution is highly functional when used for various applications such as grinding, cutting, sawing, drilling, and more.
FEATURES
ValCool micro-emulsion is a semi-synthetic low-mineral cutting fluid, free from chlorine, phenol, sulfur, nitrate, and boron.
This water-soluble machining oil offers low foam properties and is recommended to be used within 5-10% concentration.
This cost-effective machining solution is easy to dispose of and does not cause skin irritations.
It is available in an amber/blue color with a mild odor.
This is a new sealed 55-gallon drum of VALCOOL VP 800 P SEMI-SYNTHETIC CUTTING FLUID.
VP800P Chlorine-free Rust-preventive Machining Solution from Walter Valenite. ValCool VP800P semi-synthetic micro-emulsion has excellent aluminum machining properties. This low mineral oil is chlorine-free and is formulated with extreme pressure additives and rust-prevention agents so that you can achieve great surface finishes and rust-free workpieces. Besides, the fluid remarkably helps you have faster operations and extended tool life. This stable cutting oil provides you with extreme lubricity and heat absorption, and therefore, you can proceed with an adequately cooled-down cutting zone. This semi-synthetic cutting fluid from Walter Valenite offers low foam properties for smooth machining. It effectively resists bacteria growth and, in turn, prevents rancidity and improves sump life. By using this high-film-strength product, there is less metal-to-metal contact and proper chip formation. This cutting fluid is available in 5-gallon pail, 55-gallon drum, and 220 and 275-gallon tote containers, and it is recommended to be used in 5 to 10 percent concentration to achieve maximum results. This VP800P cost-effective metalworking fluid is free from phenol, sulfur, nitrate, and boron, and it works the best on aluminum machining. However, it can be efficiently used on materials such as ductile iron, cast iron, gray iron, copper, steel, Inconel, titanium, brass, etc. You can use the fluid for all moderate-to-heavy-duty machining operations, including cutting, drilling, sawing, and grinding. The slightly viscous liquid is water-soluble and turns milky blue in color with a mild odor. It promotes tramp oil rejection and increases the productivity of machining operations as a whole. This cutting fluid is easy to dispose of, and it minimizes maintenance costs as well. Also, it does not cause skin irritations upon exposure. Moreover, you don't have to practice any extra precautions when using the product on machine parts in the recommended concentration.
BENEFITS
EP additives and rust preventive agents in the fluid help achieve high lubrication, cutting area cooling, and brilliantly surface-finished, corrosion-free workpieces.
It speeds up machining activities, increases productivity, and extends tool life.
VP800P has great film strength to decrease metal-to-metal contact and improve chip formation.
It also fights against bacteria growth to prevent rancidity and offers cleaner sumps.
If used in the recommended concentration, you need not practice any special precautions to use the product.
APPLICATIONS
The low-mineral oil from Walter Valenite is designed for moderate-to-heavy-duty applications, and it is a perfect choice for aluminum machining tasks.
You can also use ValCool VP800P semi-synthetic cutting fluid on materials such as alloys, steels, gray iron, cast iron, ductile iron, brass, titanium, copper, etc.
This cost-effective machining solution is highly functional when used for various applications such as grinding, cutting, sawing, drilling, and more.
FEATURES
ValCool micro-emulsion is a semi-synthetic low-mineral cutting fluid, free from chlorine, phenol, sulfur, nitrate, and boron.
This water-soluble machining oil offers low foam properties and is recommended to be used within 5-10% concentration.
This cost-effective machining solution is easy to dispose of and does not cause skin irritations.
It is available in an amber/blue color with a mild odor.
