0
Winsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-Lb
Winsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-LbWinsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-Lb

Winsmith 926CDSN DL Servo Gear Reducer 20:1 Ratio 1750RPM 1.88Input HP 1133In-Lb

Current Price: $237.49
  • Frame Size: servo
  • Ratio: 40/1
  • Input RPM: 1750
  • Input Shaft Diameter: 1"
  • Vent: included
  • Input H.P: 1.88
  • Output RPM: 43.75@1750
  • Output Shaft Diameter: Aprox 1.450" through hole tapered at the ends
  • Output Torque (lbs): 1133
This is a new gear reducer. This unit will accept a servo motor with a 4-5/16" diameter pilot flange.
Details
  • Brand: Winsmith
  • Size: Length: 14 in. Width: 7 in. Height: 8 in.
  • Condition: New Other
  • SKU: 212518
  • Consigner: J
  • Warehouse Storage Location: AB-06-01
  • Shipping Weight (lbs, oz): 55,
  • Lister: jw
  • Country of Manufacture: United States
  • Items in Lot: 1
  • Frame Size: servo
  • Ratio: 40/1
  • Input RPM: 1750
  • Input Shaft Diameter: 1"
  • Vent: included
  • Input H.P: 1.88
  • Output RPM: 43.75@1750
  • Output Shaft Diameter: Aprox 1.450" through hole tapered at the ends
  • Output Torque (lbs): 1133
This is a new gear reducer. This unit will accept a servo motor with a 4-5/16" diameter pilot flange.